Product ID:ECCOBOND 285 BLACK
MSDS Date:04/22/1993
FSC:8040
NIIN:01-325-1694
Kit Part:Y
MSDS Number: BWCJL

EMERSON & CUMING INC

77 DRAGON COURT
WOBURN, MA 01888
US

Emergency Phone: 617-935-4850;617-938-8630

Info Phone: 617-935-4850;617-938-8630

Preparer: DAVID HAAS

Cage: 0VVR7

EMERSON & CUMING INC

WOBURN, MA 01888 US

Telephone: 617-935-4850;617-938-8630

Cage: 0VVR7

MODIFYING AGENT; (MODIFIERS)

Fraction By Weight: <2%

OSHA PEL N/K

ACGIH TLV: N/K

PIGMENTS

Fraction By Weight: <2%

OSHA PEL N/K

ACGIH TLV: N/K

ALUMINUM OXIDE

CAS: 1344-28-1

RTECS: BD1200000

Fraction By Weight: 70-80%

OSHA PEL 5 MG/M3 RDUST

ACGIH TLV: 10 MG/M3

EPOXY RESIN

CAS: 25085-99-8

Fraction By Weight: 20-30%

OSHA PEL N/K

ACGIH TLV: N/K

PROPANE, 1-BUTOXY-2,3-EPOXY-; (N-BUTYL GLYCIDYL ETHER)

CAS: 2426-08-6

RTECS: TX4200000

Fraction By Weight: <2%

OSHA PEL 50 PPM

ACGIH TLV: 25 PPM

AMORPHOUS SILICA

Fraction By Weight: <2%

OSHA PEL 6 MG/M3 (MFR)

ACGIH TLV: 10 MG/M3 (MFR)

TEMP PROCESSING. VENTILATION MUST BE SUFF TO

RTECS: 9999999ZZ

RESIDUE. COLLECT ABSORB MATL & WATER RINSES IN

RTECS: 9999999ZZ

AREA. SHUT OFF SOURCE OF RELS IF THIS CAN BE DONE

RTECS: 9999999ZZ

DIKE AREA TO CONTAIN SPILL & PVNT RELS TO SEWERS,

RTECS: 9999999ZZ

DISP. APPLY ABSORB MATL TO SOAK UP RESIDUE.WASH

RTECS: 9999999ZZ

TRANSFER ABSORBED MATERAL AND WATER RINSES TO

RTECS: 9999999ZZ

DILUTE BY GIVING PLENTY OF WATER TO

RTECS: 9999999ZZ

ANYTHING BY MOUTH TO A DROWSY, UNCONSCIOUS, OR

RTECS: 9999999ZZ

BEEN SHOWN TO BE MUTAGENIC IN SOME

RTECS: 9999999ZZ

OTHERS. CHROMOSOMAL ABERRATIONS WERE OBSERVED IN

RTECS: 9999999ZZ

EXPOS BY DERMAL ROUTE TO DGEBA RESINS YIELDED ONLY

RTECS: 9999999ZZ

INDICATE THAT BUTYL AND PHENYL GLYCIDYL ETHERS MAY

RTECS: 9999999ZZ

DESIGN CRITERIA .

RTECS: 9999999ZZ

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE:EYE: CONTAINS MATLS IRRIT TO
EYES.SYMPS MAY INCL BLURRED VISION,BURNING SENSATION & TEARING.
SKIN:CONTAINS MATLS WHICH CAUSE MOD SKIN IRRIT. PRLNGD/RPTD EXPOS
TO LIQ MAY EXERT DEFAT/DRYING ACTIO N ON SKIN,POSS RSLTG IN DERM.
PROD MAY CAUSE SKIN SENSIT/ALLERGIC SKIN RXNS WHICH MAY BE SEV IN
CERTAIN(EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:HLTH HAZ:INDIVS; SYMPS INCL RASH, ITCHING,
HIVES, SWELLING OF EXTREMITIES. INHAL: HEATING CAN GEN VAPS THAT
MAY CAUSE RESP IRRIT, NAUS & HDCHS.INHAL HAZ AT ROOM TEMP IS
UNLIKELY, DUE TO LOW VOLATILITY OF PROD. INGEST: HARMFUL IF
SWALLOWED.CHRONIC: ALTHOUGH SIGNIFICANCE IS UNKNOWN, DGEBA EPOXY
RESIN IN PROD HAS(ING 15)
Medical Cond Aggravated by Exposure:EXPOSURE MAY AGGRAVATE PREEXISTING
SKIN AND/OR EYE DISORDERS.

First Aid:EYE:FLUSH THORO W/WATER FOR AT LST 15 MINS WHILE HOLDING
EYELIDS OPEN.GET MED ATTN. SKIN:REMOVE ANY CONTAMD CLTHG & FLUSH
AFFECTED AREA THORO W/PLENTY OF WATER. FOLLOW BY WASHING W/SOAP &
WATER.GET ME D ATTN IF IRRIT PERSISTS. DO NOT REUSE CONTAMD CLTHG
UNTIL PROPERLY CLEANED.INHAL: REMOVE VICTIM TO FRESH AIR. PROVIDE
OXYGEN IF BRTHG IS DFCLT.GIVE ARTF RESP IF NOT BRTHG. GET IMMED MED
ATTN.(ING 13)

Flash Point:>200F,>93C
Extinguishing Media:USE CARBON DIOXIDE, DRY CHEMICAL, FOAM, WATER FOG.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPRVD SCBA & FULL PROT
EQUIP.COOL EXPOS CNTNRS W/WATER TO PVNT PRESS BUILDUP. IF LRG QTYS
OF MATL ARE INVOLVED, EVAC AREA & FIGHT(SUPDAT)
Unusual Fire/Explosion Hazard:DECOMPOSITION AND COMBUSTION PRODUCTS MAY
BE TOXIC. CLOSED CONTAINERS MAY VIOLENTLY RUPTURE UNDER FIRE
CONDITIONS.

Spill Release Procedures:SPILL RESPONSE OPERS MUST BE CONDUCTED I/A/W
PROVISIONS OF OSHA 29 CFR 1910.120.SML SPILLS:ACTIVATE AVAIL EXHST
VENT EQUIP IN IMMED SPILL AREA. WIPE UP/ABSORB SPILLED MATL
W/VERMICULITE/OTHER SIMILAR MATL. WASH AREA W/SOAPY WATER TO
REMOVE(ING 8)
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:STORE IN COOL, DRY LOCATION WITH
ADEQUATE VENTILATION. KEEP CONTAINER TIGHTLY SEALED WHEN NOT IN
USE.
Other Precautions:KEEP AWAY FROM OPEN FLAMES AND HEAT SOURCES. CONSULT
PRODUCT TECHNICAL BULLETIN FOR DETAILED STORAGE INFORMATION.

Respiratory Protection:USE AN APPROPRIATE, PROPERLY FITTED RESPIRATOR
IF EXPOS EXCEED PEL/TLV VALUES.TYPE OF PROT SELECTED (NIOSH/MSHA
APPRVD SCBA, AIR-PURIFYING, ETC.) WILL DEPEND UPON CNDTNS OF
USE.OBSERVE OSHA REGS FOR R ESPIRATORY PROTECTION (29 CFR
1910.134).
Ventilation:PROVIDE EFTVE MECH EXHST VENT TO DRAW VAPS,MISTS/FUMES GEN
DURING PROCESSING AWAY FROM WORKER & PVNT ROUTINE (SUPDAT)
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:ANSI APPRVD CHEM WORKER GOGGLES .
Other Protective Equipment:PROPER CHEM-RESISTANT APRON & ADDNL
IMPERVIOUS CLTHG SHOULD BE USED TO PVNT SKIN CONT & CONTAM OF
CLTHG.EMER EYE(SUPDAT)
Work Hygienic Practices:NORM WORK CLTHG SHOULD BE WASHED BEFORE
RE-USE.WASH HANDS & FACE THORO AFTER HNDLG PROD & BEFORE
EATING,DRINKING(SUPDAT)
Supplemental Safety and Health
FIRE FIGHT PROC: FIRE FROM SAFE DISTANCE. CNDTNS TO AVOID: TO INCOMPAT
SUBSTANCES. HAZ DECOMP PRODS: & QTY OF DECOMP BY-PRODS WILL VARY
WIDELY DEPENDING ON CNDTNS OF COMBUST. OTHER PROT EQUIP: WASH AN D
DELUGE SHOWER MEETS ANSI (ING 19) WORK HYGIENE PRACT: OR SMOKING.
VENT:INHAL.THIS IS NEC ESPEC DURING ELEV(ING 7)

HCC:T6
Vapor Pres:<0.1 @ 25C
Spec Gravity:2.35 (H*2O=1)
Solubility in Water:INSOLUBLE
Appearance and Odor:BLACK LIQUID.
Percent Volatiles by Volume:<2(WT)

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZERS, ACIDS, BASES; UNCONTROLLED MIXING WITH AMINES,
ANHYDRIDES, MERCAPTANS, IMIDAZOLES MAY CAUSE HAZ POLYM.
Stability Condition to Avoid:STORAGE IN OPEN CNTNRS,EXPOS TO OPEN
FLAME/UNCONTROLLED EXPOS TO HEAT, UNCONTROLLED MIXING W/CURING
AGENTS/EXPOS(SUPDAT)
Hazardous Decomposition Products:CARBON MONOXIDE, CARBON DIOXIDE,
ALDEHYDES,ACIDS & OTHER ORG SUBSTANCES MAY BE FORMED DURING
COMBUST.CHEM NATURE(SUPDAT)

Waste Disposal Methods:DISPOSE OF IN ACCORDANCE WITH CURRENT FEDERAL,
STATE, AND LOCAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.